Safety briefings

5S Office

Good Housekeeping. Introduction: 5S in the Office

This safety briefing outlines a systematic approach for creating the best working environment and organising a work space for efficiency and effectiveness.

Heat Stress Training for Workers

Heat Stress Training for Workers

This safety briefing highlights the definition of heat stress, a range of heat-induced conditions and rules for workers on how to work safely in the heat.

Heat Stress Training for Supervisors

Heat Stress Training for Supervisors

This safety briefing highlights key elements to help supervisors recognise the early signs of heat stress and take adequate measures. 

The importance of good housekeeping

This safety briefing highlights the importance of housekeeping.

5S (Lean) Housekeeping Campaign

This safety briefing introduces 5S (Lean) Method.

5S (Lean) Method. Phase I: Sort

This safety briefing outlines the 1st Phase of 5S (Lean) Method - Sort.

5S (Lean) Method. Phase II: Set in Order

This safety briefing outlines the 2nd Phase of 5S (Lean) Method - Set in Order.

5S (Lean) Method. Phase III: Shine

This safety briefing outlines the 3rd Phase of 5S (Lean) Method - Shine.

5S (Lean) Method. Phase IV: Standardise

This safety briefing outlines the 4th Phase of 5S (Lean) Method - Standardise.

5S (Lean) Method. Phase V: Sustain

This safety briefing outlines the 5th Phase of 5S (Lean) Method - Sustain.

Safety for visitors, safety briefing

Safety for visitors

This safety briefing provides visitors with a general overview of health, safety & environmental procedures at Damen.

Incident Reporting

This safety briefing highlights the differences between safety observations, near misses and accidents and can be used as a guideline (toolbox) for informing the workforce about the importance of reporting all incidents.

Safety briefing LMRA introduction

Last Minute Risk Assessment

This safety briefing highlights the importance of a LMRA and how to effectively carryout this final check before starting work.

Safety briefing LMRA introduction

Last Minute Risk Assessment - Short

This safety briefing introduces LMRA, the importance of it and how to effectively carryout this final check before starting work.

Guiding principle on working at height introduction

Working at Height

This safety briefing stresses the importance of using precaution when working at heights and provides the regulations that must be followed, in order to effectively mitigate the risks of injury.

Guiding principle on working at height introduction

Working at Height - short

This safety briefing concisely outlines safe procedures when working at heights.

Safety brifing Safe Lifting Short

Safe Lifting

This safety briefing highlights the proper procedures required to safely carryout lifting activities.

Safety brifing Safe Lifting Short

Safe Lifting - Short

This safety briefing concisely outlines safe lifting procedures.

Lock-Out / Tag-Out

This safety briefing outlines the importance of LOTO procedures to the safe completion of maintenance, servicing and commissioning activities.

Hot Work

This safety briefing outlines the regulations for hot work procedures and how to mitigate the hazards present during hot work.

PPE general

This safety briefing outlines the correct use of various types of PPE, reasons PPE should be worn and the risks of not wearing them. 

Manual handling

This safety briefing outlines the proper procedures involved in manual handling. Failure to follow these regulations can seriously impact the physical health of workers.

Hearing Protection

This safety briefing highlights the importance of wearing hearing protection, the types of hearing protection available and when they should be worn.

Hand protection

This safety briefing highlights the importance of hand protection and the injuries that may be sustained when it is not used or used incorrectly.

Grit/Water Blasting

This safety briefing highlights the hazards involved in blasting activities and how to prevent long-term/short term injury through a balance of engineering and administrative control measures. 

Gas Testing

This safety briefing highlights the importance of gas testing and continuous monitoring when work is to be carried out in confined spaces.

Foot protection

This safety briefing highlights the importance of protecting the feet from several hazards present in the work place.

Floor/Wall openings

This safety briefing highlights the hazards involved in unprotected holes/openings in floors or walls in the work place.

Eye protection

This safety briefing outlines specific work activities, the hazards they pose to the eyes and how to properly protect the eyes from injury.

Electrical Safety

This safety briefing highlights the hazards involved when working with electricity and ways in which they can be effectively mitigated.

Safet briefing Electrical Grounding of Vessels at Quay introduction, safety briefing, HSEQ

Electrical Grounding of vessels at quay

This safety briefing highlights the importance of earthing/grounding vessels when they are docked and the hazards that may arise if vessels are left unearthed or the process is not carried out effectively.

Dust Explosions

This safety briefing highlights the hazards linked to the accumilation of dust particles in enclosed spaces. When exposed to an ignition source, these particles may explode causing injury and fire.

Confined spaces

This safety briefing outlines the potential hazards prior to entry and during work in confined spaces.